Standards, EADs & test methods we are accredited for

Mechanical fasteners for use in concrete

Bonded fasteners for use in concrete

Systems for post-installed rebar connections with mortar

Anchor channels

Adjustable concrete screws

Metal injection anchors for use in masonry

Power-actuated fasteners for multiple use in concrete for non-structural applications

Steel plate with cast-in anchors

Plastic anchors for fixing of external thermal insulation composite systems with rendering

Glass fibre-reinforced plastic (GFRP) connectors for use in sandwich and element walls made of concrete

Fasteners for use in concrete for redundant non-structural systems

Qualification of post-installed mechanical anchors in concrete

Qualification of post-installed adhesive anchors in concrete

Standard test methods for strength of anchors in concrete elements

Standard test methods for testing bond performance of bonded anchors

Acceptance criteria for mechanical anchors in concrete elements

Acceptance criteria for anchor channels in concrete elements

Acceptance criteria for post-installed adhesive anchors in concrete elements

Glass, basalt, aramid, carbon, PBO and steel rovings for fibre-reinforced anchor spikes

Acceptance criteria for fiber-reinforced polymer composite or unreinforced polymer connectors anchored in concrete

Fibre reinforced polymer kits made of a pultruded carbon fibre laminate and an epoxy adhesive

Fibre reinforced polymer kits made of a carbon or glass fabric and an epoxy resin

Externally-bonded composite systems with inorganic matrix (FRCM) for strengthening of concrete and masonry structures

CRM (composite reinforced mortar) systems for strengthening of concrete and masonry structures

Carbon, glass, basalt and aramid FRP bars as reinforcement of structural elements

Structural sections made from fibre reinforced polymers (FRP / glass fibre composites)

Nosing expansion joints for road bridges

Mat expansion joints for road bridges

Cantilever expansion joints for road bridges

Supported expansion joints for road bridges

Modular expansion joints for road bridges

Structural bearings - elastomeric bearings

Post-tensioning kits for prestressing of structures

Rock and soil nail kits - hollow bars

Liquid applied roof waterproofing kits

Flat and profiled plastic roofing sheets made of recycled material for fully supported discontinuous roofing

Membranes for roof or wall underlays or both

Flexible sheets for waterproofing - underlays for discontinuous roofing

Flexible sheets for waterproofing - underlays for walls

Flexible sheets for waterproofing - plastic and rubber damp proof sheets including basement tanking

Flexible sheets for waterproofing - bitumen damp proof sheets including basement tanking

Polymer modified bituminous thick coatings for waterproofing - definitions and requirements

Polymer modified bituminous thick coatings - flexibility at low temperatures

Polymer modified bituminous thick coatings - resistance to rain

Polymer modified bituminous thick coatings - water resistance

Polymer modified bituminous thick coatings - dimensional stability at high temperature

Polymer modified bituminous thick coatings - watertightness

Flexible sheets for waterproofing - dimensional stability - bitumen sheets

Flexible sheets for waterproofing - dimensional stability - plastic and rubber sheets

Flexible sheets for waterproofing - flexibility at low temperature - bitumen sheets

Flexible sheets for waterproofing - flow resistance at elevated temperature - bitumen sheets

Flexible sheets for waterproofing - resistance to tearing (nail shank) - bitumen sheets

Flexible sheets for waterproofing - tensile properties - bitumen sheets

Flexible sheets for waterproofing - tensile properties - plastic and rubber sheets

Flexible sheets for waterproofing - peel resistance of joints - plastic and rubber sheets

Flexible sheets for waterproofing - shear resistance of joints - bitumen sheets

Flexible sheets for waterproofing - shear resistance of joints - plastic and rubber sheets

Flexible sheets for waterproofing - resistance to impact

Flexible sheets for waterproofing - resistance to static loading

Flexible sheets for waterproofing - artificial ageing by long term exposure to elevated temperature

Flexible sheets for waterproofing - artificial ageing by UV radiation, elevated temperature and water

Flexible sheets for waterproofing - resistance to root penetration

Flexible sheets for waterproofing - bitumen water vapour control layers

Flexible sheets for waterproofing - water vapour transmission properties

Flexible sheets for waterproofing - watertightness

Flexible sheets for waterproofing - plastic and rubber sheets - exposure to bitumen

Flexible sheets for waterproofing - exposure to liquid chemicals including water

Flexible sheets for waterproofing - length, width and straightness - bitumen sheets

Flexible sheets for waterproofing - length, width, straightness and flatness - plastic and rubber sheets

Flexible sheets for waterproofing - thickness and mass per unit area - bitumen sheets

Flexible sheets for waterproofing - thickness and mass per unit area - plastic and rubber sheets

Flexible sheets for waterproofing - visible defects - bitumen sheets

Flexible sheets for waterproofing - visible defects - plastic and rubber sheets

Standard test method for hydrostatic pressure resistance of waterproofing membranes

External Thermal Insulation Composite Systems (ETICS) with renderings

Glass fibre mesh for reinforcement of cement based renderings

Kits for ventilated external wall claddings of mechanically fixed panels

Kits for external wall claddings mechanically fixed

Thin metal composite sheet

Self-supporting double skin metal faced insulating panels - factory made products

Thermal insulation products for buildings - factory made mineral wool (MW) products

Thermal insulation products for buildings - factory made expanded polystyrene (EPS) products

Thermal insulation products for buildings - factory made extruded polystyrene foam (XPS) products

Thermal insulation - steady-state thermal resistance - heat flow meter apparatus

Standard test method for steady-state thermal transmission properties by means of the heat flow meter apparatus

Thermal performance of building materials - guarded hot plate and heat flow meter - dry and moist products of medium and low thermal resistance

Thermal performance of building materials - guarded hot plate and heat flow meter - products of high and medium thermal resistance

Thermal performance of building materials - thick products of high and medium thermal resistance

Thermal insulating products - compression behaviour

Thermal insulating products - tensile strength perpendicular to faces

Thermal insulating products - short term water absorption by partial immersion

Thermal insulating products - long term water absorption by immersion

Thermal insulating products - water vapour transmission properties

Thermal insulating products - linear dimensions of test specimens / dimensional stability under specified conditions

Hygrothermal performance of building materials - moisture content by drying at elevated temperature

Hygrothermal performance of building materials - hygroscopic sorption properties

Loose steel tubes for tube and coupler scaffolds

Couplers, spigot pins and baseplates for use in falsework and scaffolds - couplers for tubes

Couplers, spigot pins and baseplates - special couplers

Facade scaffolds made of prefabricated components - particular methods of structural design

Temporary works equipment - load testing

Temporary works equipment - scaffolds - performance requirements and general design

Adjustable telescopic steel props - product specifications, design and assessment by calculation and tests

Temporary works equipment - safety nets - safety requirements, test methods

Mobile access and working towers made of prefabricated elements

Temporary edge protection systems - product specification, test methods

Temporary works equipment - load bearing towers of prefabricated components

Ladders - part 1: terms, types, functional sizes

Ladders - part 2: requirements, testing, marking

Ladders - part 3: marking and user instructions

Ladders - part 4: single or multiple hinge-joint ladders

Ladders - part 5: accessories for ladders

Ladders - part 6: telescopic ladders

Ladders - part 7: mobile ladders with platform

Standard test method for compressive strength of cylindrical concrete specimens

Standard test method for flexural strength of concrete (third-point loading)

Standard test method for slump of hydraulic-cement concrete

Standard test method for comparing concretes on the basis of the bond developed with reinforcing steel

Standard test method for resistance of concrete to rapid freezing and thawing

Standard test method for evaluating plastic shrinkage cracking of restrained fiber reinforced concrete

Standard test method for determining age at cracking and induced tensile stress characteristics of mortar and concrete under restrained shrinkage

Standard test method for flexural performance of fiber-reinforced concrete (beam with third-point loading)

Standard specification for polyolefin chopped strands for use in concrete

Testing hardened concrete - compressive strength of test specimens

Testing hardened concrete - depth of penetration of water under pressure

Testing fresh concrete - Vebe test

Test method for metallic fibre concrete - flexural tensile strength (LOP, residual)

Test methods for fibres in concrete - effect on concrete

Fibres for concrete - polymer fibres - definitions, specifications and conformity

Precast concrete products - test methods for glass-fibre reinforced cement (GRC)

Alkali test (as listed on the scope)

Methods of testing cement - determination of strength

Products and systems for the protection and repair of concrete structures - pull-off test

Standard test method for pull-off strength of coatings using portable adhesion testers

Products and systems for the protection and repair of concrete structures - thermal compatibility - freeze-thaw cycling with de-icing salt immersion

Specification for mortar for masonry - rendering and plastering mortar

Specification for mortar for masonry - masonry mortar

Products and systems for the protection and repair of concrete structures - part 1: definitions

Products and systems for the protection and repair of concrete structures - part 2: surface protection systems for concrete

Products and systems for the protection and repair of concrete structures - part 3: structural and non-structural repair

Products and systems for the protection and repair of concrete structures - part 4: structural bonding

Products and systems for the protection and repair of concrete structures - part 5: concrete injection

Products and systems for the protection and repair of concrete structures - part 6: anchoring of reinforcing steel bar

Products and systems for the protection and repair of concrete structures - part 7: reinforcement corrosion protection

Products and systems for the protection and repair of concrete structures - part 8: quality control and evaluation of conformity (AVCP)

Products and systems for the protection and repair of concrete structures - part 9: general principles for the use of products and systems

Products and systems for the protection and repair of concrete structures - part 10: site application of products and systems and quality control of the works

Cement - composition, specifications and conformity criteria for common cements

Precast concrete products - general rules for factory production control of glass-fibre reinforced cement

Fibres for concrete - steel fibres - definitions, specifications and conformity

Standard specification for ready-mixed concrete

Standard specification for fiber-reinforced concrete

Geosynthetics - sampling and preparation of test specimens

Geosynthetics - thickness at specified pressures - single layers

Geosynthetics - mass per unit area of geotextiles and geotextile-related products

Geosynthetics - terms and definitions

Geosynthetics - wide-width tensile test

Geosynthetics - tensile test for joints/seams by wide-width strip method

Geotextiles - water permeability characteristics normal to the plane, without load

Geosynthetics - static puncture test (CBR test)

Geotextiles - characteristic opening size

Geotextiles - water flow capacity in their plane

Geosynthetics - dynamic perforation test (cone drop test)

Geosynthetics - long term protection efficiency of geotextiles in contact with geosynthetic barriers

Geotextiles - resistance to weathering

Geotextiles - microbiological resistance by soil burial

Geotextiles - screening test for hydrolysis resistance

Geosynthetics - screening test for oxidation resistance

Geotextiles - screening test for resistance to acid and alkaline liquids

Geotextiles and geotextile-related products - drainage systems

Geotextiles - erosion control works

Geotextiles - reservoirs and dams

Geosynthetic barriers - reservoirs and dams

Adhesives - test method for adhesives for floor and wall coverings - peel test

Adhesives - test methods for adhesives for floor and wall coverings - peel test

Resilient, laminate and textile floor coverings - dynamic coefficient of friction on dry floor surfaces

Standard test method for peel or stripping strength of adhesive bonds

Rubber, vulcanized or thermoplastic - tensile stress-strain properties

Rubber - determination of hardness (Shore)

Rubber, vulcanized or thermoplastic - hardness between 10 IRHD and 100 IRHD

Rubber, vulcanized or thermoplastic - indentation hardness by durometer (Shore)

Rubber, vulcanized or thermoplastic - compression set

Rubber, vulcanized or thermoplastic - density

Rubber, vulcanized or thermoplastic - effect of liquids

Rubber, vulcanized or thermoplastic - accelerated ageing and heat resistance

Rubber, vulcanized or thermoplastic - low-temperature brittleness

Sealants for non-structural use in joints in buildings and pedestrian walkways - part 1: sealants for facade elements

Sealants for non-structural use in joints in buildings and pedestrian walkways - part 2: sealants for glazing

Sealants for non-structural use in joints in buildings and pedestrian walkways - part 3: sealants for sanitary joints

Sealants for non-structural use in joints in buildings and pedestrian walkways - part 4: sealants for pedestrian walkways

Building construction - jointing products - classification and requirements for sealants

Adhesives for tiles - tensile adhesion strength of cementitious adhesives

Adhesives for ceramic tiles - test methods

Adhesives - tensile lap-shear strength of bonded assemblies

Adhesives - tensile lap-shear strength of rigid-to-rigid bonded assemblies

Adhesives - peel test for flexible-bonded-to-rigid assemblies - 90 degree peel

Adhesives - peel test for flexible-bonded-to-rigid assemblies - 180 degree peel

Standard test method for peel adhesion of pressure-sensitive tape

Adhesives for ceramic tiles - requirements, assessment and verification of constancy of performance

Plastics - tensile properties - isotropic and orthotropic fibre-reinforced composites

Fibre-reinforced plastic composites - flexural properties

Plastics - tensile properties - general principles

Plastics - tensile properties - films and sheets

Plastics - determination of tensile properties

Plastics - compressive properties

Plastics - flexural properties

Plastics - water absorption

Metallic materials - tensile testing at room temperature

Plastics - methods of exposure to laboratory light sources - fluorescent UV lamps

Plastics - methods of exposure to laboratory light sources - xenon-arc lamps

Standard practice for operating fluorescent ultraviolet (UV) lamp apparatus for exposure of nonmetallic materials

Standard practice for operating xenon arc lamp apparatus for exposure of nonmetallic materials

Paints and varnishes - rapid-deformation (impact resistance) tests - falling-weight test, large-area indenter

Paints and varnishes - rapid-deformation (impact resistance) tests - falling-weight test, small-area indenter

Solid biofuels - determination of ash content (loss on ignition)

Double twisted steel wire mesh reinforced or not with ropes

Falling rock protection kits

Wire ring mesh panels

Steel wire and wire products - steel wire for ropes - general requirements

Steel wire and wire products - general - test methods

Structural steel I and H sections - tolerances on shape and dimensions

General tolerances - linear and angular dimensions without individual tolerance indications

Steels for quenching and tempering - general technical delivery conditions

Steel wire ropes - safety - definitions, designation and classification

Steel wire ropes - safety - stranded ropes for general lifting applications

Terminations for steel wire ropes - safety - ferrules and ferrule-securing

Forged steel shackles for general lifting purposes - dee and bow shackles - grade 6 - safety

Ancillary components for masonry - ties, tension straps, hangers and brackets

Ancillary components for masonry - lintels

Ancillary components for masonry - bed joint reinforcement

Natural stone test methods - water absorption at atmospheric pressure

Natural stone test methods - water absorption coefficient by capillarity

Specification for masonry units - natural stone masonry units

Slabs of natural stone for external paving

Natural stone products - slabs for cladding

Natural stone products - modular tiles

Composite wood-based beams and columns

Reaction to fire tests - ignitability of products subjected to direct impingement of flame - single-flame source test

Third-party verification of Environmental Product Declarations - construction products

Verification of greenhouse-gas statements at organisation level

Validation and verification of GHG emission reduction and removal projects

Certification of an organisation's EPD process