NewsBlog
    Staff Login Client Portal Apply for Service

    European Assessment Document

    EAD 330083-02-0601 - Power-actuated fasteners for multiple use in concrete for non-structural applications

    Testing · NAC-037-TLCertification · NAC-026-PPSETA route
    Request a quotationTalk to an engineer

    In short

    EAD 330083-02-0601 is the EOTA European Assessment Document for power-actuated fasteners for multiple use in concrete for non-structural applications. Amstelfy Technical Solutions tests powder- and gas-actuated nails and threaded studs against this EAD in its ISO/IEC 17025-accredited laboratory in Amstelveen (NAC-037-TL): installation and functioning, characteristic resistance in concrete and durability. The test reports follow the EAD clause structure so a Technical Assessment Body can use them directly for the European Technical Assessment; Amstelfy does not issue ETAs itself. Within its ISO/IEC 17065 scope (NAC-026-PPS) Amstelfy can also act as the product certification body for this product family.

    What we assess

    • installation and functioning
    • characteristic resistance in concrete
    • durability

    Products covered

    • powder- and gas-actuated nails and threaded studs

    Accreditation status

    ActivityStandardAccreditationValidityOn scope
    TestingISO/IEC 17025:2017NAC-037-TLvalid until 2 December 2028Yes
    Product certificationISO/IEC 17065:2012NAC-026-PPSvalid until 31 January 2030Yes
    Validation & verificationISO/IEC 17029:2019NAC-006-VVvalid until 31 January 2030No
    NAC-037-TL — View certificate (PDF)NAC-026-PPS — View certificate (PDF)NAC-006-VV — View certificate (PDF)

    Route to market

    Products covered by an EAD are placed on the EU market with a European Technical Assessment issued by a Technical Assessment Body (TAB), followed by the AVCP tasks of a Notified Body and the manufacturer's Declaration of Performance and CE marking. Amstelfy performs the assessment tests, prepares the test reports in the EAD's clause structure and coordinates the test plan with the TAB; Amstelfy does not issue ETAs.

    How it works

    1. 1

      Send the standard number, product description and intended use

    2. 2

      We confirm the applicable test series, sample quantities and timeline

    3. 3

      Samples are delivered to Veilmeesterweg 20, 1187 ZW Amstelveen (Mon-Fri 09:00-17:00)

    4. 4

      You receive the report in English, written for the TAB, Notified Body, evaluation service or programme operator.

    Frequently asked questions

    No. ETAs are issued by Technical Assessment Bodies designated under the CPR. Amstelfy carries out the assessment tests in its accredited laboratory, prepares the test reports to the EAD's clause structure and coordinates the test plan with the TAB of your choice.

    Yes - EAD 330083-02-0601 is listed on Amstelfy's ISO/IEC 17025 accreditation scope NAC-037-TL (NAC, ILAC MRA member).

    powder- and gas-actuated nails and threaded studs. Send the product description and the intended use categories and we confirm the applicable test series within one working day.

    Yes. The same product family is on Amstelfy's ISO/IEC 17065 certification scope NAC-026-PPS, so testing and product certification can be combined; Amstelfy keeps the two activities organisationally separate to protect impartiality.

    Related standards

    All Anchors, fasteners & post-installed rebar testing