Harmonised or product standard
ISO 11600 - Building construction - jointing products - classification and requirements for sealants
In short
ISO 11600 - Building construction - jointing products - classification and requirements for sealants. For sealants, Amstelfy covers classification and certification and acts as ISO/IEC 17065-accredited product certification body (NAC-026-PPS) for this standard. Reports and certificates are written for use in CE marking files, Declarations of Performance and third-party approvals across Europe.
What the standard covers
ISO 11600 is the international classification and requirements standard for sealants used in building joints. It divides sealants into type G for glazing and type F for other building joints, and assigns classes by movement capability: 25, 20, 12.5 and 7.5 per cent of the joint width. Elastic classes are further split into low modulus (LM) and high modulus (HM) by the secant modulus at 100 per cent extension, with LM meaning a modulus of 0.4 MPa or less at 23 °C and 0.6 MPa or less at minus 20 °C; the 12.5 class is marked E for elastic or P for plastic behaviour according to elastic recovery, and 7.5 is plastic only. The EN 15651 series took its class system from this document.
Type testing and factory production control
Classification is demonstrated by a test programme on sealant specimens formed between the standard substrates, mortar, glass and anodised aluminium, cured by conditioning method A or B of the test standards. The methods are ISO 8339 for tensile properties and secant modulus, ISO 8340 for tensile properties at maintained extension, ISO 9046 and ISO 9047 for adhesion and cohesion at constant and variable temperature, ISO 7389 for elastic recovery, ISO 7390 for resistance to flow, ISO 10563 for change in mass and volume, ISO 10590 and ISO 10591 for behaviour after water immersion and ISO 11431 for glazing sealants. For certification, the reports are reviewed against the class requirements and factory production control is assessed and kept under surveillance.
What the report states
A certification decision under ISO 11600 states the sealant type and class, for example F 25 LM or G 20 HM, the substrates and conditioning method for which the classification holds, and the evidence relied upon. The underlying reports carry secant modulus in MPa, recovery and volume change in per cent, flow in mm and pass or fail statements for the extension and cycling tests. Manufacturers quote the classification on data sheets and in tender responses.
Where the result is required
ISO 11600 classes are quoted on sealant data sheets worldwide and are required in specifications for facade, glazing and precast joints in markets outside the European CE-marking system, including the Middle East, Africa, Asia-Pacific and parts of the Americas. Because EN 15651 adopted the same classes and test methods, a manufacturer with a complete EN 15651 type-test file can usually obtain ISO 11600 classification from the same evidence. Product certification against ISO 11600 is offered under the ISO/IEC 17065 scope.
What we assess
- classification and certification
Products covered
- sealants
Accreditation status
| Activity | Standard | Accreditation | Validity | On scope |
|---|---|---|---|---|
| Testing | ISO/IEC 17025:2017 | NAC-037-TL | valid until 2 December 2028 | No |
| Product certification | ISO/IEC 17065:2012 | NAC-026-PPS | valid until 31 January 2030 | Yes |
| Validation & verification | ISO/IEC 17029:2019 | NAC-006-VV | valid until 31 January 2030 | No |
Route to market
Products covered by a harmonised European standard are CE marked on the basis of a Declaration of Performance; other product standards support national approvals and third-party certification. Amstelfy provides the initial type testing / type testing and, where the standard is on its ISO/IEC 17065 scope, acts as the product certification body.
How it works
1
Send the standard number, product description and intended use
2
We confirm the applicable test series, sample quantities and timeline
3
Samples are delivered to Veilmeesterweg 20, 1187 ZW Amstelveen (Mon-Fri 09:00-17:00)
4
You receive the report in English, written for the TAB, Notified Body, evaluation service or programme operator.
Frequently asked questions
Related standards
- EN 1372 - Adhesives - test method for adhesives for floor and wall coverings - peel test
- ISO 22631 - Adhesives - test methods for adhesives for floor and wall coverings - peel test
- EN 13893 - Resilient, laminate and textile floor coverings - dynamic coefficient of friction on dry floor surfaces
- ASTM D903 - Standard test method for peel or stripping strength of adhesive bonds
- ISO 37 - Rubber, vulcanized or thermoplastic - tensile stress-strain properties
- ISO 48 - Rubber - determination of hardness (Shore)
- ISO 48-2 - Rubber, vulcanized or thermoplastic - hardness between 10 IRHD and 100 IRHD
- ISO 48-4 - Rubber, vulcanized or thermoplastic - indentation hardness by durometer (Shore)