Harmonised or product standard
EN 1504-1 - Products and systems for the protection and repair of concrete structures - part 1: definitions
In short
EN 1504-1 - Products and systems for the protection and repair of concrete structures - part 1: definitions. For concrete repair and protection products, Amstelfy covers definitions in its ISO/IEC 17025-accredited laboratory (NAC-037-TL). Reports and certificates are written for use in CE marking files, Declarations of Performance and third-party approvals across Europe.
What the standard covers
EN 1504-1 is the terminology part of the EN 1504 series. It defines the words the other parts use: product and system, structural and non-structural repair, surface protection by hydrophobic impregnation, impregnation or coating, repair mortar families such as hydraulic cement mortar CC, polymer-modified hydraulic mortar PCC and polymer mortar PC, bonding, injection, anchoring and reinforcement corrosion protection products, and the distinction between a principle, the physical or chemical basis for arresting deterioration, and a method, the way a principle is put into practice. It contains no requirements or tests of its own, but every test report, Declaration of Performance and specification in the series relies on its definitions to be read consistently, which is why it sits on the scope alongside the testable parts.
Type testing and factory production control
In practice the part is applied by identifying, before testing starts, which category a product belongs to and therefore which product part and which test methods apply. A polymer-modified cementitious mortar for reprofiling is a PCC repair mortar under part 3; a silane treatment is a hydrophobic impregnation under part 2; an epoxy for plate bonding is a structural bonding product under part 4. The laboratory uses the definitions to label specimens, choose reference substrates and describe fracture faces in the vocabulary the other parts expect, so that a report can be mapped directly to the Declaration of Performance.
What the report states
A test report issued under the series states the product type and class using EN 1504-1 terms, so the client, a specifier and a certification body read the same meaning. No measured value derives from part 1 itself; its contribution is the unambiguous classification that precedes the numbers.
Where the result is required
Reading and writing specifications, test reports and Declarations of Performance under EN 1504-2 to EN 1504-7, drafting repair method statements under EN 1504-9 and EN 1504-10, and translating product descriptions between manufacturers, engineers and public clients across Europe. It is the entry point for any manufacturer deciding which part of the series governs a new product.
What we assess
- definitions
Products covered
- concrete repair and protection products
Accreditation status
| Activity | Standard | Accreditation | Validity | On scope |
|---|---|---|---|---|
| Testing | ISO/IEC 17025:2017 | NAC-037-TL | valid until 2 December 2028 | Yes |
| Product certification | ISO/IEC 17065:2012 | NAC-026-PPS | valid until 31 January 2030 | No |
| Validation & verification | ISO/IEC 17029:2019 | NAC-006-VV | valid until 31 January 2030 | No |
Route to market
Products covered by a harmonised European standard are CE marked on the basis of a Declaration of Performance; other product standards support national approvals and third-party certification. Amstelfy provides the initial type testing / type testing and, where the standard is on its ISO/IEC 17065 scope, acts as the product certification body.
How it works
1
Send the standard number, product description and intended use
2
We confirm the applicable test series, sample quantities and timeline
3
Samples are delivered to Veilmeesterweg 20, 1187 ZW Amstelveen (Mon-Fri 09:00-17:00)
4
You receive the report in English, written for the TAB, Notified Body, evaluation service or programme operator.
Frequently asked questions
Related standards
- ASTM C39 - Standard test method for compressive strength of cylindrical concrete specimens
- ASTM C78 - Standard test method for flexural strength of concrete (third-point loading)
- ASTM C143/C143M - Standard test method for slump of hydraulic-cement concrete
- ASTM C234 - Standard test method for comparing concretes on the basis of the bond developed with reinforcing steel
- ASTM C666 - Standard test method for resistance of concrete to rapid freezing and thawing
- ASTM C1579 - Standard test method for evaluating plastic shrinkage cracking of restrained fiber reinforced concrete
- ASTM C1581/C1581M - Standard test method for determining age at cracking and induced tensile stress characteristics of mortar and concrete under restrained shrinkage
- ASTM C1609 - Standard test method for flexural performance of fiber-reinforced concrete (beam with third-point loading)