



Beproeving van ETICS, gevelbekleding en waterdichte membranen
Beproeving van ETICS, gevelbekleding en waterdichte membranen volgens EAD's en EN-normen: hygrothermische en hechtproeven op ETICS, windbelasting en stootproeven op gevelkits en waterdichtheid.
Producten die wij beproeven
Volledige beproevingsmogelijkheden voor gevelsystemen en producten voor de gebouwschil.
Kits voor buitengevelbekleding
- Geventileerde gevelsystemen
- Regenschermbekleding
- Composietpaneelsystemen
- Natuurstenen en keramische gevelbekleding
Vliesgevelsystemen
- Elementenvliesgevels
- Stijl-regelsystemen
- Structurele beglazing
- Dubbele gevels
Afdichtingskitten & voegsystemen
- Siliconenkitten
- Polyurethaankitten
- Hybride kitten
- Bewegingsvoegsystemen
Gevelcomponenten
- Consoles en achterconstructies
- Thermische onderbrekingselementen
- Verankeringssystemen
- Bevestigingsaccessoires
Laboratorium voor gevelproeven
Neem een kijkje in onze ISO 17025-geaccrediteerde testfaciliteiten.


Beproeving van ETICS, gevelbekleding en waterdichte membranen: wat we meten en hoe
De beproeving van ETICS, gevelbekleding en waterdichte membranen omvat de gebouwschil van de isolatielaag tot het dak. ETICS-kits met EPS, minerale wol, PIR/PUR of andere isolatie en een pleistersysteem worden beproefd volgens EAD 040083 beproeving van ETICS: hygrothermisch gedrag op de proefwand, vorst-dooigedrag, hechtsterkte van lijm, basislaag en pleister, en stootvastheid. Alkalibestendig glasvezelwapeningsweefsel wordt beproefd volgens EAD 040016 op treksterkte en rek, in geleverde toestand en na alkaliveroudering.
Mechanisch bevestigde gevelbekledingskits volgen EAD 090062 beproeving van gevelbekledingskits voor mechanische weerstand, windbelasting, stoot en duurzaamheid. Metaalcomposietplaten voor gevels volgen EAD 210046, en sandwichpanelen met metalen deklagen en een kern van PIR, PUR, minerale wol of EPS volgen EN 14509 beproeving van sandwichpanelen, met trek- en druksterkte loodrecht op het paneel, afschuifsterkte en -modulus, plooispanning en kruip.
Voor waterdichte membranen geldt EN 1928 waterdichtheidsproef voor membranen voor bitumen-, kunststof- en rubberbanen, samen met trekeigenschappen volgens EN 12311-1 en EN 12311-2, pel- en afschuifweerstand van naden, weerstand tegen stoot en statische belasting, kunstmatige veroudering, weerstand tegen wortelingroei volgens EN 13948 en waterdampdoorlatendheid. Dak- en wandonderlagen worden beproefd volgens EN 13859-1 en EN 13859-2, vloeibaar aangebrachte dakafdichtingskits volgens EAD 030350 en polymeergemodificeerde bitumineuze dikke coatings volgens EN 15814.
Geotextiel en geokunststoffen worden beproefd op treksterkte over de volle breedte volgens EN ISO 10319 brede trekproef voor geotextiel, CBR-ponsweerstand volgens EN ISO 12236, waterdoorlatendheid en screeningproeven op weer-, hydrolyse- en oxidatiebestendigheid.
Geaccrediteerde beproevingsmethoden — NAC-037-TL (ISO/IEC 17025:2017)
| Norm | Titel | Producten |
|---|---|---|
| EAD 030218-01-0402 | Membranes for roof or wall underlays or both | breather membranes, underlays |
| EAD 030350-00-0402 | Liquid applied roof waterproofing kits | liquid applied roofing membranes (PU, PMMA, acrylic, bitumen) |
| EAD 040016-01-0404 | Glass fibre mesh for reinforcement of cementitious or cement-based renderings | alkali-resistant glass fibre reinforcing mesh for ETICS and renders |
| EAD 040083-01-0404 | External Thermal Insulation Composite Systems (ETICS) with renderings | ETICS kits with EPS, mineral wool, PIR/PUR or other insulation and a rendering system |
| EAD 090019-01-0404 | Kits for external wall claddings of expanded glass granulates boards, magnesium oxide boards or other mineral boards with rendering applied on site | ventilated cladding kits |
| EAD 090062-01-0404 | Kits for external wall claddings mechanically fixed | cladding kits |
| EAD 210046-00-1201 | Thin metal composite sheet | aluminium / metal composite sheets for facades |
| EAD 220069-00-0402 | Flat and profiled plastic roofing sheets made of recycled material for fully supported discontinuous roofing | recycled-plastic roofing sheets and tiles |
| EN 1107-1 | Flexible sheets for waterproofing - dimensional stability - bitumen sheets | bitumen sheets |
| EN 1107-2 | Flexible sheets for waterproofing - dimensional stability - plastic and rubber sheets | plastic and rubber sheets |
| EN 1109 | Flexible sheets for waterproofing - flexibility at low temperature - bitumen sheets | bitumen sheets |
| EN 1110 | Flexible sheets for waterproofing - flow resistance at elevated temperature - bitumen sheets | bitumen sheets |
| EN 1296 | Flexible sheets for waterproofing - artificial ageing by long term exposure to elevated temperature | bitumen, plastic and rubber sheets |
| EN 1297 | Flexible sheets for waterproofing - artificial ageing by UV radiation, elevated temperature and water | bitumen, plastic and rubber sheets |
| EN 1548 | Flexible sheets for waterproofing - plastic and rubber sheets - exposure to bitumen | plastic and rubber sheets |
| EN 1847 | Flexible sheets for waterproofing - exposure to liquid chemicals including water | plastic and rubber sheets |
| EN 1848-1 | Flexible sheets for waterproofing - length, width and straightness - bitumen sheets | bitumen sheets |
| EN 1848-2 | Flexible sheets for waterproofing - length, width, straightness and flatness - plastic and rubber sheets | plastic and rubber sheets |
| EN 1849-1 | Flexible sheets for waterproofing - thickness and mass per unit area - bitumen sheets | bitumen sheets |
| EN 1849-2 | Flexible sheets for waterproofing - thickness and mass per unit area - plastic and rubber sheets | plastic and rubber sheets |
| EN 1850-1 | Flexible sheets for waterproofing - visible defects - bitumen sheets | bitumen sheets |
| EN 1850-2 | Flexible sheets for waterproofing - visible defects - plastic and rubber sheets | plastic and rubber sheets |
| EN 1928 | Flexible sheets for waterproofing - watertightness | bitumen, plastic and rubber sheets |
| EN 1931 | Flexible sheets for waterproofing - water vapour transmission properties | bitumen, plastic and rubber sheets |
| EN 12224 | Geotextiles - resistance to weathering | geotextiles, geogrids |
| EN 12225 | Geotextiles - microbiological resistance by soil burial | geotextiles, geogrids |
| EN 12310-1 | Flexible sheets for waterproofing - resistance to tearing (nail shank) - bitumen sheets | bitumen sheets |
| EN 12311-1 | Flexible sheets for waterproofing - tensile properties - bitumen sheets | bitumen sheets |
| EN 12311-2 | Flexible sheets for waterproofing - tensile properties - plastic and rubber sheets | plastic and rubber sheets |
| EN 12316-1 | Flexible sheets for waterproofing - peel resistance of joints - plastic and rubber sheets | plastic and rubber sheets |
| EN 12317-1 | Flexible sheets for waterproofing - shear resistance of joints - bitumen sheets | bitumen sheets |
| EN 12317-2 | Flexible sheets for waterproofing - shear resistance of joints - plastic and rubber sheets | plastic and rubber sheets |
| EN 12447 | Geotextiles - screening test for hydrolysis resistance | geotextiles, geogrids |
| EN 12691 | Flexible sheets for waterproofing - resistance to impact | bitumen, plastic and rubber sheets |
| EN 12730 | Flexible sheets for waterproofing - resistance to static loading | bitumen, plastic and rubber sheets |
| EN 13719 | Geosynthetics - long term protection efficiency of geotextiles in contact with geosynthetic barriers | geotextiles, geogrids |
| EN 13859-1 | Flexible sheets for waterproofing - underlays for discontinuous roofing | roof underlays |
| EN 13859-2 | Flexible sheets for waterproofing - underlays for walls | wall underlays / breather membranes |
| EN 13948 | Flexible sheets for waterproofing - resistance to root penetration | roof waterproofing sheets |
| EN 13967 | Flexible sheets for waterproofing - plastic and rubber damp proof sheets including basement tanking | plastic and rubber damp proof membranes |
| EN 13969 | Flexible sheets for waterproofing - bitumen damp proof sheets including basement tanking | bitumen damp proof membranes |
| EN 13970 | Flexible sheets for waterproofing - bitumen water vapour control layers | bitumen vapour control layers |
| EN 14030 | Geotextiles - screening test for resistance to acid and alkaline liquids | geotextiles, geogrids |
| EN 14509 | Self-supporting double skin metal faced insulating panels - factory made products | metal faced sandwich panels (PIR, PUR, MW, EPS cores) |
| EN 15813 | Polymer modified bituminous thick coatings - flexibility at low temperatures | PMBC coatings |
| EN 15814 | Polymer modified bituminous thick coatings for waterproofing - definitions and requirements | PMBC basement waterproofing coatings |
| EN 15816 | Polymer modified bituminous thick coatings - resistance to rain | PMBC coatings |
| EN 15817 | Polymer modified bituminous thick coatings - water resistance | PMBC coatings |
| EN 15818 | Polymer modified bituminous thick coatings - dimensional stability at high temperature | PMBC coatings |
| EN 15820 | Polymer modified bituminous thick coatings - watertightness | PMBC coatings |
| EN ISO 9862 | Geosynthetics - sampling and preparation of test specimens | geotextiles, geogrids |
| EN ISO 9863-1 | Geosynthetics - thickness at specified pressures - single layers | geotextiles, geogrids |
| EN ISO 9864 | Geosynthetics - mass per unit area of geotextiles and geotextile-related products | geotextiles, geogrids |
| EN ISO 10318 | Geosynthetics - terms and definitions | geotextiles, geogrids |
| EN ISO 10319 | Geosynthetics - wide-width tensile test | geotextiles, geogrids |
| EN ISO 10321 | Geosynthetics - tensile test for joints/seams by wide-width strip method | geotextiles, geogrids |
| EN ISO 11058 | Geotextiles - water permeability characteristics normal to the plane, without load | geotextiles, geogrids |
| EN ISO 12236 | Geosynthetics - static puncture test (CBR test) | geotextiles, geogrids |
| EN ISO 12956 | Geotextiles - characteristic opening size | geotextiles, geogrids |
| EN ISO 12958 | Geotextiles - water flow capacity in their plane | geotextiles, geogrids |
| EN ISO 13433 | Geosynthetics - dynamic perforation test (cone drop test) | geotextiles, geogrids |
| EN ISO 13438 | Geosynthetics - screening test for oxidation resistance | geotextiles, geogrids |
| ASTM D5385 | Standard test method for hydrostatic pressure resistance of waterproofing membranes | underground waterproofing membranes |
Scope zoals vermeld in de bijlage bij onze NAC-accreditatie. Elke methode linkt naar de technische pagina.
Overige methoden — niet gedekt door onze accreditatie
Deze methoden vallen buiten onze ISO/IEC 17025-geaccrediteerde scope. Neem contact met ons op om te bespreken of wij de beproeving kunnen uitvoeren of coördineren.
| Norm | Beschrijving |
|---|---|
| EN 13501-1 | Brandclassificatie van bouwproducten |
| EN 1991-1-4 | Belastingen op constructies — Windbelastingen |
| EN 12179 | Vliesgevels — Luchtdoorlatendheidsproef |
| EN 12154 | Vliesgevels — Waterdichtheid |
| EN 12152 | Vliesgevels — Luchtdoorlatendheid |
| EN 13830 | Vliesgevels — Productnorm |
| EN 1026 | Ramen en deuren — Luchtdoorlatendheid |
| EN 1027 | Ramen en deuren — Waterdichtheid |
| EN 12211 | Ramen en deuren — Weerstand tegen windbelasting |
| ISO 8339 | Afdichtingskitten — Bepaling van trekeigenschappen |
Veelgestelde vragen
Wat houdt beproeving volgens EAD 090062-01-0404 voor gevelbekledingskits in?
EAD 090062-01-0404 heeft betrekking op kits voor buitengevelbekleding, waaronder geventileerde gevelsystemen en regenschermbekleding. De beproeving omvat mechanische weerstand (windbelasting, eigengewicht, stootbelasting), duurzaamheid (vries-dooi, UV, hygrothermische cycli), weerstand tegen verwering en brandprestaties die vereist zijn voor het verkrijgen van een Europese technische beoordeling (ETA).
Welke proeven zijn vereist voor vliesgevelsystemen?
Voor vliesgevelsystemen zijn luchtdoorlatendheidsproeven (EN 12179, EN 12152), waterdichtheidsproeven (EN 12154) onder statische en dynamische druk en proeven op weerstand tegen windbelasting vereist. De productnorm EN 13830 definieert de algemene prestatiekenmerken. Raam- en deurcomponenten in vliesgevels worden beproefd volgens EN 1026, EN 1027 en EN 12211.
Welke beproevingsnormen worden gebruikt voor gevelkitten?
Gevelkitten worden beproefd volgens ISO 8339 voor hechtingseigenschappen bij trekbelasting en EN 15651-1 voor prestatie-eisen voor afdichtingskitten voor gevelelementen. De beproeving beoordeelt hechting, cohesie, bewegingsopname en duurzaamheid onder versnelde verouderingsomstandigheden voor siliconen-, polyurethaan- en hybride kitsystemen.
Welke soorten gevelproducten kunnen worden beproefd?
Ons laboratorium beproeft geventileerde gevelsystemen, regenschermbekleding, composietpaneelsystemen, natuurstenen en keramische gevelbekleding, elementen- en stijl-regelvliesgevels, structurele beglazing, dubbele gevels, consoles en achterconstructies, thermische onderbrekingselementen, verankeringssystemen en siliconen-, polyurethaan- en hybride kitten.
Zijn gevelproeven vereist voor CE-markering onder de CPR?
Ja, kits voor buitengevelbekleding en vliesgevelsystemen moeten worden beproefd om aan te tonen dat zij voldoen aan de essentiële kenmerken onder de Bouwproductenverordening (CPR). Producten die onder geharmoniseerde normen (hEN) of Europese beoordelingsdocumenten (EAD) vallen, moeten worden beproefd en van CE-markering worden voorzien voordat zij op de EU-markt worden gebracht.
Klaar om uw gevelproducten te laten beproeven?
Neem contact op met ons laboratoriumteam om uw eisen voor gevelproeven te bespreken.