Back to all articles
    Sustainability

    From Factory Data to a Verified EPD: EPD Development and Verification, Step by Step

    Burak Yorulmaz, EPD verifier, Amstelfy Technical Solutions
    September 23, 2026
    10 min read
    From Factory Data to a Verified EPD: EPD Development and Verification, Step by Step

    An Environmental Product Declaration (EPD) is a verified, standardised report of a product's environmental performance across its life cycle. For construction products it is built on ISO 14025 and EN 15804+A2. Manufacturers increasingly need comparable life-cycle data for green building schemes, public tenders and building-level LCAs, and the revised Construction Products Regulation is bringing environmental performance into the regulatory framework.

    What happens between "we need an EPD" and a published declaration, and who does what along the way? This guide follows the General Programme Instructions (GPI) of The International EPD System and the construction products PCR 2019:14. Other EN 15804-based programmes, such as MRPI in the Netherlands, follow the same logic under their own rules.

    At a glance: Scoping → Data collection → LCA model → EPD draft → Independent verification → Publication → Annual follow-up.

    Who does what

    Three roles are involved, and they are kept apart:

    • The manufacturer (EPD owner) provides the production data, owns the EPD and keeps it up to date.
    • The LCA practitioner — an in-house team, a consultant or an EPD tool — builds the life-cycle model, writes the LCA background report and drafts the EPD.
    • The independent verifier — an individual verifier approved by the programme operator, or an accredited certification body — checks the LCA and the EPD before publication.

    Amstelfy Technical Solutions acts only as the verifier. It is listed by The International EPD System as an accredited certification body and is recognised by Stichting MRPI as a verification bureau for MRPI®-EPD certificates. To stay independent, Amstelfy does not prepare the LCA or the EPD it verifies. Manufacturers that develop many EPDs in-house can have their EPD process certified instead (see Step 5).

    Step 1 — Scope the product and select the PCR

    The manufacturer and its LCA practitioner define the product or product family, the manufacturing sites and whether a single-product, multi-product or average EPD fits. For construction products, PCR 2019:14 is the main Product Category Rules document under The International EPD System, sometimes supplemented by a complementary PCR (c-PCR) for the product group. The verifier will check that the PCR version used is valid.

    EN 15804+A2 requires modules A1–A3 (raw materials, transport and manufacturing), C1–C4 (end of life) and D (benefits and loads beyond the system boundary). C1–C4 and D may only be left out when all the conditions in EN 15804+A2 are met: the product is physically integrated with other products so that it cannot be separated at end of life, it is no longer identifiable after physical or chemical transformation, and it contains no biogenic carbon. A4–A5 and use-stage B modules can be added where relevant. A declared unit, such as 1 kg, 1 m², 1 m³ or one item, is chosen at this stage.

    Under The International EPD System, the EPD is registered in the programme's portal at the start, which reserves its registration number.

    Step 2 — Collect production data

    Data quality drives most of the work. Manufacturing-stage modelling uses site-specific primary data, normally covering a full year of production. A typical data collection covers:

    • Bill of materials, suppliers, transport distances and modes
    • Plant energy and water consumption
    • Packaging, production waste and emissions
    • Product losses and the installation and end-of-life scenarios to be declared

    Upstream processes such as raw-material production, electricity and fuel supply are modelled with recognised background databases. Every material figure should be traceable to a source document, because the verifier will sample them.

    Step 3 — Model the LCA and write the background report

    The life-cycle assessment follows ISO 14040/14044, EN 15804+A2 and the PCR rules for system boundaries, allocation and cut-off. Results stay modular rather than being collapsed into a single life-cycle total. The EN 15804+A2 indicator set covers climate change (total, fossil, biogenic and land use), ozone depletion, acidification, eutrophication, photochemical ozone formation, depletion of abiotic resources, water use, resource use, waste and output flows.

    The LCA background report is not published, but it is the main document the verifier reviews: goal and scope, data sources and quality, assumptions, allocation and cut-off choices, sensitivity checks and interpretation.

    See what an EPD verifier checks in your LCA.

    Step 4 — Draft the declaration

    The EPD sets out the product description and technical characteristics, the content declaration (including relevant REACH Candidate List substances), the declared unit, system boundaries, scenarios beyond the factory gate, module-by-module results, additional environmental information, version history and references. The draft is checked against the GPI and the PCR before it goes to the verifier.

    Step 5 — Independent third-party verification

    An individual verifier approved by the programme operator, or an accredited certification body listed by it, examines the LCA, the results and the EPD against the GPI, the PCR and EN 15804+A2. Checks cover data collection, inventory and impact methods, unit processes, consistency between the background report and the EPD, and plausibility. The verifier may ask for access to the model or supporting datasets.

    Verification is a documented dialogue, not a rubber stamp. Each finding records its location and type, the practitioner's response and the verifier's conclusion. Once all findings are closed, the verifier signs the verification statement and report. EPDs under The International EPD System are normally valid for five years from the version date.

    The International EPD System offers two further routes. With a pre-verified EPD tool, individual verification is reduced in scope or replaced by an annual verification procedure. With EPD process certification, designed for organisations that develop and manage EPDs at scale, the EPD owner runs data collection, LCA and EPD generation internally without third-party verification of each individual declaration, and an accredited certification body certifies and periodically audits the process. Amstelfy provides EPD process certification under ISO/IEC 17065 (NAC-026-PPS).

    Step 6 — Register and publish

    The verified EPD and the verification report go to the programme operator for review and publication — for The International EPD System through its EPD Portal and on environdec.com. A declaration only becomes a published EPD once the operator publishes it. It can then support tenders, building certification and building-level LCAs, including machine-readable use in LCA databases. For MRPI®-EPD certificates, registration and publication run through Stichting MRPI.

    Step 7 — Keep the EPD representative

    The EPD owner checks at least once a year whether the declaration still represents the product. Under the GPI, an update with re-verification is mandatory when an indicator's aggregated result over the declared life-cycle stages increases by 10% or more (for climate change, GWP-total), when declared information contains errors, or when the product information or content declaration changes substantially. An updated EPD may receive a new five-year validity period from its new version date.

    More in EPD validity, updates and renewal.

    Preparing for verification

    Verification goes fastest when the documents are complete at the start. Have ready:

    • the LCA background report, written for verification
    • data collection sheets with mass and energy balances
    • access to the model or exported calculation files, with a dataset list and versions
    • the draft EPD in the programme format
    • technical data sheets and the full recipe or bill of materials
    • twelve months of production, energy and waste records that support the primary data

    Timing depends on data completeness, product complexity and the programme operator's review; the schedule is agreed after scoping.

    Talk to us

    If your team or your LCA practitioner is preparing an EPD and you need an independent verifier — under The International EPD System or for an MRPI®-EPD — or an existing EPD needs re-verification after an update, contact us with the product, the PCR and the programme you have in mind, or read more about our EPD verification service.

    Frequently asked questions

    The manufacturer, usually with an LCA practitioner — an in-house team, a consultant or an EPD tool. The practitioner builds the LCA model, writes the background report and drafts the EPD; an independent verifier checks it before the programme operator publishes it.

    Not the same EPD. ISO 14025 and the programme rules require the verifier to be independent of the LCA and the EPD being verified. Amstelfy only verifies; it does not prepare the LCA or the EPD.

    Under The International EPD System normally five years from the version date, provided the annual follow-up confirms that the EPD still represents the product. Larger changes require an update and re-verification.

    Not on every route. The International EPD System also allows pre-verified EPD tools and EPD process certification for organisations that develop and manage EPDs at scale. Amstelfy certifies EPD processes under ISO/IEC 17065 (NAC-026-PPS).

    Sources

    Need Help with Your Compliance Journey?

    Our team of experts is ready to assist you with testing, certification, and verification services.

    Contact Us

    Related Articles